| PART |
Description |
Maker |
| 1180-02-10A 1180-01 1180-02-0.1A 1180-01-3A 1180-0 |
Protection of loads in power distribution systems in control cabinets and process control
|
ETAL Group
|
| L9823 |
OCTAL LOW-SIDE DRIVER FOR BULB, RESISTIVE AND INDUCTIVE LOADS WITH SERIAL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
|
| L9825 |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC
Octal Low-side Driver For Resistive and Inductive Loads With Serial / Parallel Input Control, Output Protection and Diagnostic
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL,OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
意法半导
|
| E-L9823 |
Octal low-side driver for bulb, resistive and inductive loads with serial input control, output protection and diagnostic
|
STMicroelectronics
|
| BTS650P BTS650-PE3180 |
From old datasheet system
Smart Highside High Current Power Switch (Overload protection Current limitation Short circuit protection Overtemperature protection)
|
Infineon
Siemens Semiconductor Group
|
| 5VB3 10EB 10EB1 10EB3 10VB 10VB1 10VB3 10VB6 1EB 1 |
General Purpose RFI Power Line Filters General Purpose for High Impedance Loads at Low Cost
|
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
ETC[ETC]
|
| RE028 |
RE028 [Updated 3/03. 9 Pages] The RE028 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 4.5V output voltage. rated for loads up
The RE028 is a Low Drop Out (LDO) voltage regulator macrocell with a fixed 4.5V output voltage, rated for loads up to 300 mA. It is designed to supply radio frequency synthesizers and used as a controller for the antenna switch.
|
Atmel
|
| AN307 |
USE OF TRIACS ON INDUCTIVE LOADS
|
SGS Thomson Microelectronics
|
| RE031 |
RE031 [Updated 3/03. 10 Pages] A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage. rated for loads of up
A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.5V output voltage, rated for loads of up to 5 mA. A typical application is real-time clock, backup battery supply in mobile terminals.
|
Atmel
|
| BTS426L1 BTS426L1-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
| BTS721L1 |
From old datasheet system
Smart Four Channel Highside Power Switch (Overload protection Current limitation Short-circuit protection Thermal shutdown)
|
Siemens Semiconductor G...
Infineon
Siemens Semiconductor Group
|
